How To Have Wooden Fence Posts Installed To Avoid Rot

Corral-Board5The right wood fence can really make a property pop and can do a lot to protect your family, pets and home. If you are thinking of having a wood fence installed at your Houston home, you have likely weighed the different styles and colors available. Maybe you have even priced how much the project will cost. While these are important considerations, you should also take a close look at the Houston fence company that you hire. It is essential to hire professionals who know what must be done to install wood fencing correctly.

After all, wood fencing that is not installed properly can rot, sag or even fall down within a few years. Such fences are unsightly and fail to protect your family and property. Of course, they are also a big waste of money. For homeowners in Houston, wood fences can represent a serious financial investment. That is why it is essential to learn the basics of proper fencing installation and to make sure that the contractor you hire follows them.

Get a Soak In

Before wooden fence posts can be installed, they should be coated in a wood preservative. These specialty preservatives have copper napthanate, which helps seal moisture out. Fence posts that are prepared this way will not rot quickly because they won’t absorb moisture. If you are buying posts or getting them from a fencing company, make sure that they have been treated properly. Be sure to ask if posts are treated with a preservative before they are installed. If the company does not use any kind of preservative, it is a good idea to hire someone else to do the job. All legitimate contractors understand the importance of protecting fence posts.

Give Your Posts the Right Foundation

Wooden fence posts must be coated in a specialty preservative, but that is not the only thing that matters when it comes to installing them in the ground. It is also important to ensure that posts stay in place and provide a solid framework for fence rails. To accomplish this, your contractor should try to sink one-third of each fencing post in the ground if possible. Even if that is not possible, your contractor should make sure that the posts are secure by surrounding them with gravel and packed dirt or pouring in concrete. If your contractor will be pouring concrete, make sure that the area around the base of the post where it touches the concrete is sealed with waterproof caulking.

Go with Angles

Once your fence is installed, it will have to be cut to the desired height with a circular saw. As a general rule, the tops of fences should be cut at a slight angle so that water runs off them instead of pooling. It might seem strange, but it will not have any negative impact on how your wood fence looks. In fact, fences that are not cut at an angle tend to look unfinished. Also the top of the cut fence posts should be treated with a preservative.

Dry It Out

In Houston, fences absolutely must be dry before they are painted, stained or sealed because they might fall victim to our area’s relatively high humidity levels. This means that your contractor might advise against painting your fence right after it is installed. Instead, you will need to wait until the wood is completely dry. This could take a few months, so be sure to choose a contractor who can help you determine when the wood fencing is dry. If you do not allow wooden fence posts and rails to dry completely before you paint them, moisture could be trapped inside the wood and cause it to rot.